DTXr doc » History » Version 9
Torbjorn Carlqvist Admin, 09/07/2021 07:53 PM
| 1 | 1 | Torbjorn Carlqvist Admin | h1. DTXr doc |
|---|---|---|---|
| 2 | |||
| 3 | 5 | Torbjorn Carlqvist Admin | h3. Installation |
| 4 | 2 | Torbjorn Carlqvist Admin | |
| 5 | 6 | Torbjorn Carlqvist Admin | |
| 6 | * System Requirements |
||
| 7 | DTXr can run on any machine that can run Java 11 and has sufficient with RAM and disk capacity. |
||
| 8 | Absolute minimum 512Mbyte of RAM and 200Mb of disk space. But best is >1GByte of RAM and 1Gbyte of disk space available for DTXr runtime alone. |
||
| 9 | 8 | Torbjorn Carlqvist Admin | A good choice is a Raspberry 2,3 or 4 with >1GByte on board and a >8Gbyte SD installed and of course any PC/Server works equally good. |
| 10 | 6 | Torbjorn Carlqvist Admin | |
| 11 | * Network Requirements |
||
| 12 | 9 | Torbjorn Carlqvist Admin | DTXr can run stand alone without any active network connection. In that case the management pages is accessible via localhost interface. But for DTXr to be a fully functional BACnet/IP device it must be connected to an IP network that offers IP address via DHCP and where broadcast traffic is allowed. |
| 13 | 6 | Torbjorn Carlqvist Admin | |
| 14 | 5 | Torbjorn Carlqvist Admin | h3. Setup |
| 15 | 2 | Torbjorn Carlqvist Admin | |
| 16 | 5 | Torbjorn Carlqvist Admin | h3. User's Guide |
| 17 | 3 | Torbjorn Carlqvist Admin | |
| 18 | 5 | Torbjorn Carlqvist Admin | h3. Developer's Guide |