Project

General

Profile

Actions

DTXr doc » History » Revision 7

« Previous | Revision 7/71 (diff) | Next »
Torbjorn Carlqvist Admin, 09/07/2021 08:18 AM


DTXr doc

Installation

  • System Requirements
    DTXr can run on any machine that can run Java 11 and has sufficient with RAM and disk capacity.
    Absolute minimum 512Mbyte of RAM and 200Mb of disk space. But best is >1GByte of RAM and 1Gbyte of disk space available for DTXr runtime alone.
    A good choice is a Raspberry 2,3 or 4 with >1GByte on board and a >8Gbyte SD installed and of course a PC/Server works equally good.
  • Network Requirements
    DTXr can work stand alone without any active network connections. In that case the management pages is accessible via localhost interface. But for DTXr to be a fully functional BACnet/IP device it must be connected to an IP network where broadcast traffic is allowed.

Setup

User's Guide

Developer's Guide

Updated by Torbjorn Carlqvist Admin about 3 years ago · 7 revisions