DTXr doc » History » Revision 64
Revision 63 (David Fredriksson, 10/09/2023 11:25 AM) → Revision 64/71 (David Fredriksson, 10/30/2023 01:05 PM)
{{>toc}}
h1. DTXr documentation
h3. Installation
* System Requirements
DTXr can run on any machine that can run +Java 11+ and has sufficient with RAM and disk capacity.
|Requirement|System RAM|System DISK|Example|
|Minimal|512Mbyte|512Mbyte|Raspberry 1, Raspberry Zero|
|Better|512Mbyte|512Mbyte|Rasberry Zero 2|
|Avarage|1GByte|1Gbyte|Raspberry 2-4|
|Top|2GByte|8Gbyte|Raspberry 4, Raspberry CM4, Server, PC|
* Network Requirements
DTXr can run stand alone without any active network connection. In that case the management pages is accessible via localhost interface. But for DTXr to be a fully functional BACnet/IP device it must be connected to an IP network that offers IP address via DHCP and where broadcast traffic is allowed.
* Download DTXr software packages
Currently only customers to DAVITOR can download DTXr. Contact info@davitor.com for purchase information.
* Install on Linux
** There is special install scripts, please follow these steps:
### Download latest DTXr _base_ image and copy to a SD-card that has 16Gbyte capacity or more
Or install a new image and install java
<pre>sudo apt install default-jdk </pre>
### Insert the SD card, attach keyboard and screen via cable and start the device
### When you get prompt login as **admin/davitor**
### Download the installation script from davitor repository
<pre>wget --user=**** --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/dtx.sh</pre>
There is also a utillity script that can set the host name and MAC adress. Note, optional and only applicable on LION product appliances.
<pre>wget --user=**** --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/system.sh</pre>
Make the scripts exec
<pre>sudo chmod 770 *.sh</pre>
### Run installation as below where you first alter:
*** Required version (-v x.y.z)
*** Partner user name (-u ****)
*** Partner password (-p ****)
*** Application password for the HTTP interface login on port 9090 (-app-password xxxxxxx)
*** BACnet Decvice Id (bac-device-id=nnnnn)
*** BACnet password which you will use to control the BACnet device DCC (bacnet-password=xxxxxx)
*** BACnet Device Name (bac-device-name=yyyy)
For LION products use:
<pre>sudo ./dtx.sh -v 3.0.15 -u **** -p **** -s "bac-device-id=nnnnn bac-device-name=yyyy app-password=xxxxxx bac-password=xxxxxx lion-enabled=true"</pre>
For other installations like PC, Servers etc. use:
<pre>sudo ./dtx.sh -v 3.0.15 -u **** -p **** -s "bac-device-id=nnnnn bac-device-name=yyyy app-password=xxxxxx bac-password=xxxxxx"</pre>
### Utillity script to set MAC and host name
<pre>sudo ./system.sh -mac 70:B3:D5:16:E8:99 -hn DTX-L1-8R8DI</pre>
* Upgrade on linux
If you already have DTX installed and should upgrade to a new version.
<pre>sudo ./dtx.sh -v 3.1.7 -u **** -p ****</pre>
* Manage the DTX service
Stop<pre>sudo systemctl stop dtx</pre>
Start<pre>sudo systemctl start dtx</pre>
Check status<pre>systemctl status dtx</pre>
Disable service, wont start at reboot<pre>sudo systemctl disable dtx</pre>
Enable service, will start automatically at reboot<pre>sudo systemctl enable dtx</pre>
* For other Linux distributions follow this steps
### _TBD..._
* Install on Windows
** Follow these steps:
### _TBD..._
h3. LION Fieldbus
* See LION [[LION:Wiki]] for howto in installataion, channel assigmnets and testing.
h3. Setup
DTXr is setup via Menu -> Setup page.
* System
** Administrator password - Password for the default (and not changeable) account **"admin"**. Default is **"davitor"**.
_When you log in you will start att /home/admin
There is another user "pi" as well with a secret password._
** Operator username - Username for the typical user of any HMI developed on this device. Typically a machine operator. [Optional]
** Operator password - Password for the operator user. [Optional]
** Operator start page - Set any web page in the project folder that will automatically shown on an operator login. [Optional]
** Log Level - The system severity level for the system_app.log in /Logs tree directory.
** Platform - This is where DTX gets its information on which hardware options to consider.
* BACnet
** _TBD..._
* Davitor Advantage
** _TBD..._
* Wireless Mesh
** _TBD..._
* Bluetooth
** _TBD..._
* External Database Access
** _TBD..._
* File Integration
** _TBD..._
* HTTP
** _TBD..._
* LION Interface
** _TBD..._
* IoT HUB (BETA)
** _TBD..._
h3. User's Guide
* _TBD..._
h3. Developer's Guide
[[IDE|IDE walk through]]
[[Javascript|The DTXr Javascript guide]]
[[Blockly|Blockly tutorials]]