DTXr

{{>toc}}

h1. DTXr documentation

h3. Installation

* System Requirements

DTXr can run on any machine that can run +Java 11+ and has sufficient with RAM and disk capacity.

|Requirement|System RAM|System DISK|Example|

|Minimal|512Mbyte|512Mbyte|Raspberry 1, Raspberry Zero|

|Better|512Mbyte|512Mbyte|Rasberry Zero 2|

|Avarage|1GByte|1Gbyte|Raspberry 2-4|

|Top|2GByte|8Gbyte|Raspberry 4, Raspberry CM4, Server, PC|

* Network Requirements

DTXr can run stand alone without any active network connection. In that case the management pages is accessible via localhost interface. But for DTXr to be a fully functional BACnet/IP device it must be connected to an IP network that offers IP address via DHCP and where broadcast traffic is allowed.

* Download DTXr software packages

Currently only customers to DAVITOR can download DTXr. Contact info@davitor.com for purchase information.

* Install on Linux

** There is special install scripts, please follow these steps:

### Download latest DTXr _base_ image and copy to a SD-card that has 16Gbyte capacity or more

### Insert the SD card, attach keyboard and screen via cable and start the device

### When you get prompt login as **admin/davitor**

### Download the installation script from davitor repository

<pre>wget --user=**** --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/dtx.sh</pre>

There is also a utillity script that can set the host name and MAC adress. Note, optional and only applicable on LION product appliances.

<pre>wget --user=**** --password=****  https://artifacts.davitor.com/repository/dtx-raw/scripts/system.sh</pre>

Make the scripts exec

<pre>sudo chmod 770 *.sh</pre>

### Run installation as below where you first alter:

*** Required version (-v x.y.z)

*** Partner user name (-u ****)

*** Partner password (-p ****)

*** Application password for the HTTP interface login on port 9090 (-app-password xxxxxxx)

*** BACnet Decvice Id (bac-device-id=nnnnn)

*** BACnet password which you will use to control the BACnet device DCC (bacnet-password=xxxxxx)

*** BACnet Device Name (bac-device-name=yyyy)

For LION products use:

<pre>sudo ./dtx.sh -v 3.0.15 -u **** -p **** -s "bac-device-id=nnnnn bac-device-name=yyyy app-password=xxxxxx bac-password=xxxxxx lion-enabled=true"</pre>

For other installations like PC, Servers etc. use:

<pre>sudo ./dtx.sh -v 3.0.15 -u **** -p **** -s "bac-device-id=nnnnn bac-device-name=yyyy app-password=xxxxxx bac-password=xxxxxx"</pre>

### Utillity script to set MAC and host name

<pre>sudo ./system.sh -mac 70:B3:D5:16:E8:99 -hn DTX-L1-8R8DI</pre>

* Upgrade on linux

If you already have DTX installed and should upgrade to a new version.

<pre>sudo ./dtx.sh -v 3.1.5 -u **** -p ****</pre>

* Manage the DTX service

Stop<pre>sudo systemctl stop dtx</pre>

Start<pre>sudo systemctl start dtx</pre>

Check status<pre>systemctl status dtx</pre>

Disable service, wont start at reboot<pre>sudo systemctl disable dtx</pre>

Enable service, will start automatically at reboot<pre>sudo systemctl enable dtx</pre>

* For other Linux distributions follow this steps

### _TBD..._

* Install on Windows

** Follow these steps:

### _TBD..._

h3. LION Fieldbus

* See LION [[LION:Wiki]] for howto in installataion, channel assigmnets and testing.

h3. Setup

DTXr is setup via Menu -> Setup page.

* System

** Administrator password - Password for the default (and not changeable) account  **"admin"**. Default is **"davitor"**.

_When you log in you will start att /home/admin

There is another user "pi" as well with a secret password._

** Operator username - Username for the typical user of any HMI developed on this device. Typically a machine operator. [Optional]

** Operator password - Password for the operator user. [Optional]

** Operator start page - Set any web page in the project folder that will automatically shown on an operator login. [Optional]

** Log Level - The system severity level for the system_app.log in /Logs tree directory.

** Platform - This is where DTX gets its information on which hardware options to consider.

* BACnet

** _TBD..._

* Davitor Advantage

** _TBD..._

* Wireless Mesh

** _TBD..._

* Bluetooth

** _TBD..._

* External Database Access

** _TBD..._

* File Integration

** _TBD..._

* HTTP

** _TBD..._

* LION Interface

** _TBD..._

* IoT HUB (BETA)

** _TBD..._

h3. User's Guide

* _TBD..._

h3. Developer's Guide

[[IDE|IDE walk through]]

[[Javascript|The DTXr Javascript guide]]

[[Blockly|Blockly tutorials]]