DTXr doc » History » Revision 44
Revision 43 (David Fredriksson, 04/07/2022 01:30 PM) → Revision 44/71 (David Fredriksson, 04/07/2022 01:31 PM)
{{>toc}}
h1. DTXr documentation
h3. Installation
* System Requirements
DTXr can run on any machine that can run +Java 11+ and has sufficient with RAM and disk capacity.
|Requirement|System RAM|System DISK|Example|
|Minimal|512Mbyte|512Mbyte|Raspberry 1, Raspberry Zero|
|Better|512Mbyte|512Mbyte|Rasberry Zero 2|
|Avarage|1GByte|1Gbyte|Raspberry 2-4|
|Top|2GByte|8Gbyte|Raspberry 4, Raspberry CM4, Server, PC|
* Network Requirements
DTXr can run stand alone without any active network connection. In that case the management pages is accessible via localhost interface. But for DTXr to be a fully functional BACnet/IP device it must be connected to an IP network that offers IP address via DHCP and where broadcast traffic is allowed.
* Download DTXr software packages
Currently only customers to DAVITOR can download DTXr. Contact info@davitor.com for purchase information.
* Install on Linux
** For Raspberry with Raspberry OS/Rasbian there is special install scripts, please follow these steps:
### Download latest DTXr _base_ image and copy to a SD-card that has 16Gbyte capacity or more
### Insert the SD card, attach keyboard and screen via cable and start the device
### When you get prompt login as **admin/davitor**
### Download install scripts with password for davitor sight
#### <pre>wget --user=admin --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/dtx.sh</pre>
#### <pre>wget --user=admin --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/system.sh</pre>
### Run installation as <pre>sudo ./dtx.sh -v 2.25 -u admin -p **** -s "bac-device-id=83336 bac-device-name=DTX-AMADA app-password=xxxxxx lion-enabled=true"
</pre>
The line above is an example where chosen parameters where set at installation and where xxxxxx is the new password for the new device to use.
### Set MAC by system.sh script
### Example:
<pre>sudo ./system.sh -mac 70:B3:D5:E6:00:10 -hn WASH</pre>
This will excecute nesesary commands as well as change the file
/lib/systemd/system/setmac.service
**$ **[Unit]
Description=DSet the MAC address for the ENC28J60 enet adapter at eth0
Wants=network-pre.target
Before=network-pre.target
BindsTo=sys-subsystem-net-devices-eth0.device
After=sys-subsystem-net-devices-eth0.device
[Service]
Type=oneshot
ExecStart=/sbin/ip link set dev eth0 down
ExecStart=/sbin/ip link set dev eth0 address 00:00:00:00:00:00
ExecStart=/sbin/ip link set dev eth0 up
[Install]
WantedBy=multi-user.target
Replace the "00:00:00:00:00:00", by a MAC-address of your choice, but keep the first pair of zero's. Then do this:
$ sudo chmod 644 /lib/systemd/system/setmac.service** /lib/systemd/system/setmac.service
**$ $ sudo systemctl daemon-reload** daemon-reload
**$ $ sudo systemctl enable setmac.service**
*System files
**settings.json
/usr/local/davitor/dtx/settings.json
The file contains most of the important settings that is used by the DTX environment and most of it can be changed from the settingspage.
If the file is changed manually, than please stop dtx envronment by:
use of **systemctl **
sudo systemctl --help
systemctl [OPTIONS...] {COMMAND} ...
Example:
Stop
sudo systemctl stop dtx
Run
sudo systemctl start dtx
Check
systemctl status dtx.service
** For other Linux distributions follow this steps
### _TBD..._
* Install on Windows
** Follow these steps:
### _TBD..._
h3. LION Fieldbus
* See LION [[LION:Wiki]] for howto in installataion, channel assigmnets and testing.
h3. Setup
DTXr is setup via Menu -> Setup page.
* System
** Administrator password - Password for the default (and not changeable) account **"admin"**. Default is **"davitor"**.
_When you log in you will start att /home/admin
There is another user "pi" as well with a secret password._
** Operator username - Username for the typical user of any HMI developed on this device. Typically a machine operator. [Optional]
** Operator password - Password for the operator user. [Optional]
** Operator start page - Set any web page in the project folder that will automatically shown on an operator login. [Optional]
** Log Level - The system severity level for the system_app.log in /Logs tree directory.
* BACnet
** _TBD..._
* Davitor Advantage
** _TBD..._
* Wireless Mesh
** _TBD..._
* Bluetooth
** _TBD..._
* External Database Access
** _TBD..._
* File Integration
** _TBD..._
* HTTP
** _TBD..._
* LION Interface
** _TBD..._
* IoT HUB (BETA)
** _TBD..._
h3. User's Guide
* _TBD..._
h3. Developer's Guide
[[IDE|IDE walk through]]
[[Javascript|The DTXr Javascript guide]]
[[Blockly|Blockly tutorials]]