Project

General

Profile

Actions

DTXsc documentation

Installation

  • System Requirements
    DTXsc can run on any machine that can run Java 11 and has sufficient with RAM and disk capacity.
Requirement System RAM System DISK Example
Minimal 512Mbyte 512Mbyte Raspberry 1, Raspberry Zero
Better 512Mbyte 512Mbyte Rasberry Zero 2
Avarage 1GByte 1Gbyte Raspberry 2-4
Top 2GByte 8Gbyte Raspberry 4, Raspberry CM4, Server, PC
  • Network Requirements
    DTXsc require an IPV4 interface to function. The service using UDP broadcast to communicate with local network device according to BACnet/IP standard. To reach Internet HUB's the service uses WebSocket communication.
  • Download DTXsc software packages
    Currently only customers to DAVITOR can download DTXsc. Contact for purchase information.
  • Install on Linux
    • For Raspberry with Raspberry OS/Rasbian there is special install scripts, please follow these steps:
      1. Download latest DTXsc base image and copy to a SD-card that has 16Gbyte capacity or more
      2. Insert the SD card, attach keyboard and screen via cable and start the device
      3. When you get prompt login as admin/davitor
      4. Download the installation script from davitor repository
        wget --user=**** --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/dtxsc.sh

        There is also a utillity script that can set the host name and MAC adress. Note, optional and only applicable on LION product appliances (Lx-serie)
        wget --user=**** --password=****  https://artifacts.davitor.com/repository/dtx-raw/scripts/system.sh

        Make the scripts exec
        sudo chmod 770 *.sh
      5. Run installation script. See details below and change to fit your network setup:
        sudo ./dtxsc.sh -v 1.6 -u **** -p **** --bip_instance 777124 --sc_network 2000 --sc_mac 021020040501 --bip_network 3344 --bip_ip 192.168.1.175 --bip_port 47809 --sc_hub_ip 83.145.40.201 --sc_hub_port 44456 -loc HEMMA -descr SCRIPT
        • -v DTXsc version to run
        • -u user for download
        • -p psw for download
        • --bip_instance Device id on the BACnet/IP side of the router.
        • --sc_network Virtual network id on the Securore Connect side of the router
        • --sc_mac Virtuell MAC for this device on the Secure Connect side of the router. Has to be unique within the whole virtual network.
        • --bip_ip The desired IPv4 address to bind the UDP-port for the BACnet/IP side of the router. Leave blank to let DTXsc determine the IP automatically.
        • --bip_port The UDP port for the BACnet/IP-side of the Router.
        • --sc_hub_ip The IP address to the Internet Secure Connect HUB. (Which is another DTXsc configured as a HUB)
        • -loc Sets the freetext BACnet/IP-device location-property. Use for localization of the Router.
        • -descr Sets the freetext BACnet/IP-device dexcription-property. Use for localization of the Router.
  • Utillity script to set MAC and host name
    sudo ./system.sh -mac 70:B3:D5:16:E8:99 -hn DTX-L1-8R8DI
  • Manage the DTXsc service
    Stop
    sudo systemctl stop dtxsc

    Start
    sudo systemctl start dtxsc

    Check status
    systemctl status dtxsc

    Disable service, wont start at reboot
    sudo systemctl disable dtxsc

    Enable service, will start automatically at reboot
    sudo systemctl enable dtxsc

Updated by Torbjorn Carlqvist Admin about 2 years ago · 2 revisions