DTXsc doc » History » Version 1
Torbjorn Carlqvist Admin, 09/26/2022 01:59 PM
| 1 | 1 | Torbjorn Carlqvist Admin | {{>toc}} |
|---|---|---|---|
| 2 | |||
| 3 | h1. DTXsc documentation |
||
| 4 | |||
| 5 | h3. Installation |
||
| 6 | |||
| 7 | * System Requirements |
||
| 8 | DTXsc can run on any machine that can run +Java 11+ and has sufficient with RAM and disk capacity. |
||
| 9 | |||
| 10 | |Requirement|System RAM|System DISK|Example| |
||
| 11 | |Minimal|512Mbyte|512Mbyte|Raspberry 1, Raspberry Zero| |
||
| 12 | |Better|512Mbyte|512Mbyte|Rasberry Zero 2| |
||
| 13 | |Avarage|1GByte|1Gbyte|Raspberry 2-4| |
||
| 14 | |Top|2GByte|8Gbyte|Raspberry 4, Raspberry CM4, Server, PC| |
||
| 15 | |||
| 16 | * Network Requirements |
||
| 17 | DTXsc require an IPV4 interface to function. The service using UDP broadcast to communicate with local network device according to BACnet/IP standard. To reach Internet HUB's the service uses WebSocket communication. |
||
| 18 | |||
| 19 | * Download DTXsc software packages |
||
| 20 | Currently only customers to DAVITOR can download DTXsc. Contact info@davitor.com for purchase information. |
||
| 21 | |||
| 22 | * Install on Linux |
||
| 23 | ** For Raspberry with Raspberry OS/Rasbian there is special install scripts, please follow these steps: |
||
| 24 | ### Download latest DTXsc _base_ image and copy to a SD-card that has 16Gbyte capacity or more |
||
| 25 | ### Insert the SD card, attach keyboard and screen via cable and start the device |
||
| 26 | ### When you get prompt login as **admin/davitor** |
||
| 27 | ### Download the installation script from davitor repository |
||
| 28 | <pre>wget --user=**** --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/dtxsc.sh</pre> |
||
| 29 | There is also a utillity script that can set the host name and MAC adress. Note, optional and only applicable on LION product appliances (Lx-serie) |
||
| 30 | <pre>wget --user=**** --password=**** https://artifacts.davitor.com/repository/dtx-raw/scripts/system.sh</pre> |
||
| 31 | Make the scripts exec |
||
| 32 | <pre>sudo chmod 770 *.sh</pre> |
||
| 33 | ### Run installation as below example and change as: |
||
| 34 | *** -v DTXsc version to run |
||
| 35 | *** -u user for download |
||
| 36 | *** -p psw for download |
||
| 37 | *** --bip_instance Device id on the BACnet/IP side of the router. |
||
| 38 | *** --sc_network Virtual network id on the Securore Connect side of the router |
||
| 39 | *** --sc_mac Virtuell MAC for this device on the Secure Connect side of the router. Has to be unique within the whole virtual network. |
||
| 40 | *** --bip_ip The desired IPv4 address to bind the UDP-port for the BACnet/IP side of the router. Leave blank to let DTXsc determine the IP automatically. |
||
| 41 | *** --bip_port The UDP port for the BACnet/IP-side of the Router. |
||
| 42 | *** --sc_hub_ip The IP address to the Internet Secure Connect HUB. (Which is another DTXsc configured as a HUB) |
||
| 43 | *** -loc Sets the freetext BACnet/IP-device location-property. Use for localization of the Router. |
||
| 44 | *** -descr Sets the freetext BACnet/IP-device dexcription-property. Use for localization of the Router. |
||
| 45 | <pre>sudo ./dtxsc.sh -v 1.6 -u **** -p **** --bip_instance 777124 --sc_network 2000 --sc_mac 021020040501 --bip_network 3344 --bip_ip 192.168.1.175 --bip_port 47809 --sc_hub_ip 83.145.40.201 --sc_hub_port 44456 -loc HEMMA -descr SCRIPT</pre> |
||
| 46 | ### Utillity script to set MAC and host name |
||
| 47 | <pre>sudo ./system.sh -mac 70:B3:D5:16:E8:99 -hn DTX-L1-8R8DI</pre> |
||
| 48 | |||
| 49 | * Manage the DTXsc service |
||
| 50 | Stop<pre>sudo systemctl stop dtxsc</pre> |
||
| 51 | Start<pre>sudo systemctl start dtxsc</pre> |
||
| 52 | Check status<pre>systemctl status dtxsc</pre> |
||
| 53 | Disable service, wont start at reboot<pre>sudo systemctl disable dtxsc</pre> |
||
| 54 | Enable service, will start automatically at reboot<pre>sudo systemctl enable dtxsc</pre> |